Maxwell Scientific Corporation – Manufacturer in Ambala cantt
← Back to all manufacturers

Maxwell Scientific Corporation

Maxwell Scientific Corporation is a manufacturer of Wire and Cable Testing Instruments, Digital Micro-ohm Meters, Insulation Resistance Testers and Kelvin Double Bridges in Ambala cantt, Haryana…

Laboratory and Scientific Equipment

Ambala cantt, Ambala

Hakaru Verified · Level 2 · Factory verified on 13 November 2026

What they make

  • Wire and Cable Testing Instruments
  • Digital Micro-ohm Meters
  • Insulation Resistance Testers
  • Kelvin Double Bridges
  • High Voltage Testers
  • Tensile Testing Machines
  • Standard Resistance Boxes
  • DecadeBox

Products

  • Digital Conductivity Meter, 4.1/2 Digit by Maxwell Scientific Corporation, Ambala cantt

    Digital Conductivity Meter, 4.1/2 Digit

    Model number: CM-101

    The Digital Conductivity Meter (model CM-131) is made by Maxwell Scientific Corporation in Ambala cantt, Haryana. It is listed under Laboratory and Scientific Equipment. Before ordering, ask the manufacturer for the full specification sheet, including measurement range, accuracy, calibration…

  • Digital Micro-Ohm meter by Maxwell Scientific Corporation, Ambala cantt

    Digital Micro-Ohm meter

    Model number: DM-181

    Digital Micro-ohm meter DM-181 • Range: 1 Micro Ohm to 19.999 k Ohms in 7 decimal ranges selectable by selector switch. • 4½ digit, LED Display, Accuracy + 0.2 % (overall) • Current – 2 Amps. at Lower range( 19.999 mohm) & Lower (approx. 0.1 A at higher ranges.) • ‘SET ZERO’ Knob is also provided…

  • HMI MicroOhm Meter by Maxwell Scientific Corporation, Ambala cantt

    HMI MicroOhm Meter

    Model number: DM-181HMI

    • Range: 1 Micro Ohm to 19.999 k Ohms • Accuracy + 0.2 % (overall) • Current – 2 Amps. at Lower range( 19.999 mohm) & Lower (appro. 0.1 A at higher ranges.) • Mains Operated. 4 Terminal arrangement. Stable • ‘SET ZERO’ Knob is also provided. • Screen will display RT, Temp., Correction Factor & R20…

  • Million Meg-ohm Meter by Maxwell Scientific Corporation, Ambala cantt

    Million Meg-ohm Meter

    Model number: MM-107

    IR (Insulation Resistance) testing specially designed to give stable reading of high accuracy, stable infinity at all ranges even under high humidity, conspicuous meter scale. Output is short-circuit protected. Range: 1 Meg-ohm to 1 x 107 Megohm at 500 V DC Voltage range : 90 to 525 V DC…

  • Digital Insulation Tester by Maxwell Scientific Corporation, Ambala cantt

    Digital Insulation Tester

    Model number: MM-107HDD

    Packaging Type : ABS Box with locking facility. Outer Size : 11.5 x 9.5 x 5.5 Inch Range : 1 Meg-ohm to 10 Tera Ohm in seven ranges. Display Type : Digital Test Voltage 250,500&1000V Load Capacity : 1.5 mA Color : White Accuracy : + 5% Warranty : 1 year Max Resistance : 10 Tera Ohm Standard…

  • Industrial Kelvin Double Bridge by Maxwell Scientific Corporation, Ambala cantt

    Industrial Kelvin Double Bridge

    Model number: KDB-2031

    * Best Method for measurement of Resistance * Range: 0.2 micro-ohm to 11 Ohms * Accuracy: Better than 0.2 % . * It can be certified by NABL Accredited Lab. * Mostly cable industries use this model. * Provided with all accessories e.g. DND-361,DC Source 5 A & wooden attachment of 1 metre etc.

  • Digital Null Detector by Maxwell Scientific Corporation, Ambala cantt

    Digital Null Detector

    Model number: DND-361

    Replacement of spot Reflecting Galvanometer. Spot Reflecting Galvanometer measure very small value of current in KDB whereas Digital null detector also do the same thing.Digital Display of 4.1/2 digit is provided on front panel. Connect it with Kelvin Double Bridge & set zero as 00.00 & now do…

  • Smoke Density Test Apparatus by Maxwell Scientific Corporation, Ambala cantt

    Smoke Density Test Apparatus

    Model number: SD-2843HMI

    (As per ASTM-D2843) HMI (human Machine Interface ) is provided in this model which will display Light absorption (%) , Timer (in second & minute), DC voltage (it should be 5.80 V) and temperature (room temp. in Degree centigrade). Readings are displayed on screen after every 15 Sec. (upto 240…

  • Constant Current Source 0-100A by Maxwell Scientific Corporation, Ambala cantt

    Constant Current Source 0-100A

    Model number: CCS-101

    with digital temp. sensor to see temp. rise This Test instrument is designed to cover a laboratory Procedure for testing Maximum current carrying of any domestic cable say 1 mm, 2.5 mm or 4 mmor 6 mm square. Give current to any wire upto 100 Amp. & see temp. rise upto 100 Amp. & see temp. rise…

  • 5 Channel DC High Voltage Breakdown tester (2KV) with HMI by Maxwell Scientific Corporation, Ambala cantt

    5 Channel DC High Voltage Breakdown tester (2KV) with HMI

    Model number: DCHV-105HMI

    5 No. of DC Source of 2KV/50mA are provided on front panel & you can adjust any voltage say 1.2 KV & see display in HMI. 5 Timers are also inbuilt in HMI & you can set any tripping current say 10 or 20 or 30 or 50 mA & see Red or Green indicators to indicate Pass or Fail. At the time of failure…

More Laboratory and Scientific Equipment manufacturers in Ambala, Haryana

About

Maxwell Scientific Corporation (www.maxwellindia.com) manufactures wire and cable testing instruments and electrical calibration standards in Ambala Cantt, Haryana, for manufacturers and NABL calibration laboratories. Its range includes digital micro-ohm meters and conductivity meters for wire and strip, million megohm insulation resistance testers, Kelvin double bridges and Wheatstone bridges, AC and DC high voltage testers, AC spark testers, constant current sources for current carrying capacity tests, tensile testing machines, elongation testers, torsion and wrapping machines, ageing, hot set, water absorption and thermal stability test apparatus, smoke density and flammability test apparatus, profile projectors and travelling microscopes, and standard resistance, megohm, decade resistance, capacitance and inductance boxes. Several instruments are designed for test methods in Indian and international standards such as IS 694, IS 7098, IS 10810 and ASTM D2843.

Loading manufacturer…